THUNDER TIGER mini Titan V2 Series Instruction Manual
  1. Manuals
  2. Brands
  3. THUNDER TIGER Manuals
  4. Toy
  5. mini Titan V2 Series
  6. Instruction manual

THUNDER TIGER mini Titan V2 Series Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
All manuals and user guides at all-guides.com
This radio control model is not a toy! Before beginning assembly, please read
this manual thoroughly.
本產品為高性能模型非一般玩具，組裝與操作前請詳閱本產品說明書。
The contents are subject to change without prior notice due to product
improvements and specificatrion changes.
本套件所附之零件可能跟圖示有所差異。因產品後續之設計研發或功能不斷改善之原
因，我們將保留產品規格變更權力，不再另行通知使用者。
INSTRUCTION MANUAL
INSTRUCTION MANUAL
組 裝 說 明 書
組 裝 說 明 書
No.4712 / 4713

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the mini Titan V2 Series and is the answer not in the manual?

Questions and answers

Related Manuals for THUNDER TIGER mini Titan V2 Series

Summary of Contents for THUNDER TIGER mini Titan V2 Series

  • Page 1 All manuals and user guides at all-guides.com INSTRUCTION MANUAL INSTRUCTION MANUAL 組 裝 說 明 書 組 裝 說 明 書 No.4712 / 4713 This radio control model is not a toy! Before beginning assembly, please read this manual thoroughly. 本產品為高性能模型非一般玩具，組裝與操作前請詳閱本產品說明書。...

  • Page 2: Table Of Contents

    All manuals and user guides at all-guides.com CONTENTS INTRODUCTION INTRO & CAUTION / 簡介與注意事項 OTHER ITEMS REQUIRED / 其餘必須配件 MANUAL FORMAT / 說明書使用方式 ASSEMBLY / 組裝步驟 MAIN ROTOR / 主旋翼機構組裝 LINKAGE ROD INSTALLATION / 連桿組裝 MAIN FRAME ASSEMBLY / 本體組裝 MAIN GEAR SET / 主齒輪組裝...

  • Page 3: Intro & Caution / 簡介與注意事項

    Thank you for purchasing the Thunder Tiger mini Titan E325 V2 series electric R/C helicopter. This new helicopter is the latest innovation by Thunder Tiger. It has the perfect combination of flying stability and the agility for 3D flying. This helicopter is an excellent choice for flying enthusiasts like you. For convenient assembly and safe operation of the helicopter, please read the instructions carefully.
  • Page 4 All manuals and user guides at all-guides.com FLIGHT SAFETY CHECKLIST / 飛行前安全確認工作項目 1. Make sure that the transmitter battery is fully charged before flying. 2. Make sure all control surfaces are operated properly before flying. 3. Do a range check of the radio before the first flight. The electronic equipment must operate properly at a range of at least 5 meters (18 ft) even with the transmitter antenna collapsed.

  • Page 5: Other Items Required / 其餘必須配件

    All manuals and user guides at all-guides.com OTHER ITEMS REQUIRED / 另購裝備 RADIO SET 遙控器組 Transmitter Receiver Micro Servos Gyro 接收機 (helicopter type only, (Control Surface x3, 陀螺儀 6 or more channels) Rudder Servo x1) 發射機（6動以上直昇機用） 伺服機 x3、尾舵伺服機 x1 POWER SYSTEM 電子類裝備...

  • Page 6: Manual Format / 說明書使用方式

    All manuals and user guides at all-guides.com MANUAL FORMAT / 說明書使用方式 How to read the instruction manual? Example 說明範例 說明書導讀 A: Indicates the assembly step number and the parts bags TAIL UNIT-TORQUE-TUBE / 尾部總成組裝-軸傳版 Bag N that are to be assembled. Material No.

  • Page 7: Main Rotor / 主旋翼機構組裝

    All manuals and user guides at all-guides.com MAIN ROTOR / 主旋翼機構組裝 Bag A Material No. Description Material No. Description 名稱 名稱 BV2615 MATEL MAIN ROTOR HUB SET BK1480 COLLAR, d2×D3×5.6t , d2×D3×5.6t 金屬主旋翼固定座組 軸環 BV1408 MATEL MAIN ROTOR HUB SET BK1203 LINKAGE BALL(ø3.8) (ø3.8)
  • Page 8 All manuals and user guides at all-guides.com MAIN ROTOR / 主旋翼機構組裝 Bag B Material No. Description Material No. Description 名稱 名稱 BK1499 METAL FLYBAR CONTROL ARM-1 BK1410-1 SUS FLYBAR ROD 金屬穩定翼轉臂 不鏽鋼穩定桿 BK1500 METAL FLYBAR CONTROL ARM-2 HME3-3B SET SCREW M3×3 M3×3 金屬穩定翼轉臂...
  • Page 9 All manuals and user guides at all-guides.com MAIN ROTOR / 主旋翼機構組裝 Bag B Material No. Description Material No. Description 名稱 名稱 BK1203 LINKAGE BALL(ø3.8) (ø3.8) HMO26 FLAT WASHER d2.6 d2.6mm 連接頭 墊片 HSP16-6N COUNTERSUNK SCREW M1.6×6 M1.6×6 HMX0409Y THRUST BEARING d4xD9x4 止推軸承...
  • Page 10 All manuals and user guides at all-guides.com MAIN ROTOR / 主旋翼機構組裝 Bag B+C Material No. Description Material No. Description 名稱 名稱 BK1502 HARDENED MAIN SHAFT BK1203 LINKAGE BALL(ø3.8) (ø3.8) 高強度主軸 連接頭 BK1086 SOCKET SCREW M2×14 M2×14 BK1481 FLAT WASHER d2xD3.7x0.5t d2xD3.7x0.5t 內六角半牙螺絲...

  • Page 11: Linkage Rod Installation / 連桿組裝

    All manuals and user guides at all-guides.com LINKAGE ROD INSTALLATION / 連桿組裝 Bag D Material No. Description Material No. Description 名稱 名稱 BK0932 BALL LINK d3.8x10mm BK1064 LINKAGE ROD 1.3X10mm 單頭連接桿 連接桿 BK1063 LINKAGE ROD D1.3x7mm BK1066 LINKAGE ROD 1.3x24.5mm 連接桿...

  • Page 12: Main Frame Assembly / 本體組裝

    All manuals and user guides at all-guides.com MAIN FRAME / 本體組裝 Bag E+F Material No. Description Material No. Description 名稱 名稱 BK1892 CARBON MAIN FRAME BV1897-1 TAIL BEARING FLANGE SET 碳纖側板 傘齒輪座組 BK1892-1 CARBON MAIN FRAME BV2609 TAIL BEARING FLANGE SET 碳纖側板...
  • Page 13 All manuals and user guides at all-guides.com MAIN FRAME / 本體組裝 Bag G Material No. Description Material No. Description 名稱 名稱 BK2601 ANTI-ROTATION BRACKET BK1888 CANOPY STANDOFF 十字盤相位導軌 機殼支柱 BK2604 BATTERY TRAY BK2602 ANTENNA HOLDER 電池板 天線管座 BK2606 BOTTOM BRACKET BK2603 CANOPY CLIP 機身底板...

  • Page 14: Main Gear Set / 主齒輪組裝

    All manuals and user guides at all-guides.com MAIN GEAR SET / 主齒輪組裝 Bag H & I Material No. Description Material No. Description 名稱 名稱 BK0933 AUTOROTATION TAIL DRIVE GEAR (124T) BK1020 MAIN SHAFT LOCK RING 尾驅動輪 止擋圈 BV0934 MAIN GEAR (W/BEARING) HME3-3B SET SCREW M3×3 M3×3...

  • Page 15: Tail Boom / 尾管組裝

    All manuals and user guides at all-guides.com TAIL BOOM / 尾管組裝 Bag J Material No. Description Material No. Description 名稱 名稱 BK2628 DRIVE SHAFT SET, d2xD4x359L , d2xD4x359L BV1576 TAIL ROTOR SHAFT 驅動軸 尾旋翼橫軸組 BK1073 BELT MXL-3T（413T） MXL-3t（413T） BV0973A MATEL TAIL ROTOR SHAFT SET 皮帶...

  • Page 16: Tail Rotor System / 尾旋翼機構組裝

    All manuals and user guides at all-guides.com TAIL ROTOR SYSTEM / 尾旋翼機構組裝 Bag K Material No. Description Material No. Description 名稱 名稱 BK0990 TAIL PITH CONTROL LEVER-1 BK1000 TAIL PITCH LINK 尾旋翼控制桿 尾旋翼連接頭 BK0991 TAIL PITH CONTROL LEVER-2 HNU2-9Z SHOULDERED SCREW M2×9 M2×9 尾旋翼控制桿...
  • Page 17 All manuals and user guides at all-guides.com TAIL ROTOR SYSTEM / 尾旋翼機構組裝 Bag L Material No. Description Material No. Description 名稱 名稱 HME3-3B SET SCREW M3×3 M3×3 BK1501 3D CARBON TAIL FIN 無頭內六角螺絲 碳纖維垂直安定面 HNU2-9Z SHOULDERED SCREW M2×9 M2×9 HSA2-6 BUTTON HEAD SOCKET SCREW, M2X6 圓頭十字軸套螺絲...

  • Page 18: Tail Unit-Torque-Tube / 尾部總成組裝-軸傳版

    All manuals and user guides at all-guides.com TAIL UNIT-TORQUE-TUBE / 尾部總成組裝-軸傳版 Bag N Material No. Description Material No. Description 名稱 名稱 BK1082 ROD GUIDE BK1897-1 FRONT BEVEL GEAR MOUNT 前傘齒輪座 固定環 HMJ12-6B TAPPING SCREW M1.2×6 M1.2×6 HMV1370ZZY BEARING d7XD13xW4 珠軸承, d7xD13xW4 圓頭十字自攻螺絲...

  • Page 19: Tail Unit-Belt-Driven / 尾部總成組裝-皮帶版

    All manuals and user guides at all-guides.com TAIL UNIT-BELT-DRIVEN / 尾部總成組裝-皮帶版 Bag M Material No. Description Material No. Description 名稱 名稱 BK1082 ROD GUIDE BK2610 TAIL BOOM BRACKET 固定環 尾管固定座 HMJ12-6B TAPPING SCREW M1.2×6 M1.2×6 BK1886 BRACKET SPACER 圓頭十字自攻螺絲 固定座支柱 BK0923 TAIL SERVO TRAY HNX2-10B...

  • Page 20: Tail Support / 尾管支撐架組裝

    All manuals and user guides at all-guides.com TAIL SUPPORT / 尾管支撐架組裝 Bag P Material No. Description Material No. Description 名稱 名稱 BK1026 BRACKET HML2 M2 NUT 尾支撐桿座 螺帽 BK1027 ROD ø3×255mm ø3×255mm BK1071 TAIL LINKAGE ROD ø1.3 ø1.3 碳纖棒 尾拉桿 BK1025 TAIL SUPPORT ROD END BK0922...

  • Page 21: Motor Mount / 馬達安裝

    All manuals and user guides at all-guides.com MOTOR MOUNT / 馬達安裝 Bag O Material No. Description Material No. Description 名稱 名稱 BK1890 MOTOR MOUNT BK1009 DRIVE GEAR 13T 馬達座 驅動齒輪 HSA3-5B SOCKET SCREW M3×5 M3×5 HSA2-6 BUTTON HEAD SOCKET SCREW M2X6 M2x6 半圓頭內六角螺絲...

  • Page 22: Servo Installation / 伺服機裝配

    All manuals and user guides at all-guides.com SERVO INSTALLATION / 伺服機裝配 Bag P Material No. Description 名稱 HMC2-8B SOCKET SCREW M2×8 M2×8 內六角螺絲 Secure all screws shown on this page with a drop of thredlocker. 本頁顯示之螺絲請使用適量防鬆膠鎖固。 Step 1 / 步驟一 1.

  • Page 23: Electric Device / 電子設備安裝

    All manuals and user guides at all-guides.com ELECTRIC DEVICE / 電子設備安裝 Bag P Material No. Description 名稱 BK2605 RECEIVER TRAY 接收機座 HNX2-6B SOCKET BUTTON HEAD SELF TAPPING SCREW, M2×6 半圓頭內六角自攻螺絲 M2×6 BD1826-B1 ANTENNA TUBE 天線管(黑色) BK1088 RUBBER TUBE 10mm 10mm 軟管...

  • Page 24: Canopy & Main Blade / 機殼罩及主旋翼

    All manuals and user guides at all-guides.com CANOPY & MAIN BLADE / 機殼罩及主旋翼 Bag Q Material No. Description Material No. Description 名稱 名稱 BK1416 VELCRO STRAPE BK1442 BLADE SPACER 電池固定束帶 主旋翼墊片 BV2607-Y CANOPY HMC3-20B SOCKET SCREW M3×20 M3×20 機身 內六角螺絲 BK1002 RUBBER GROMMET HMM3Z...

  • Page 25: Radio System Setup / 遙控系統設定

    All manuals and user guides at all-guides.com RADIO SYSTEM SETUP / 遙控系統設定 Warning! / 警告! For safety, please ensure the motor has been deactivated and will not drive the main rotor head before performing following setting processes. You may just unplug 2 of the wires from the motor and the ESC or move the motor with pinion away from the main gear to avoid a rotating rotor head.

  • Page 26: Swashplate & Servo Movement Setting / 十字盤及伺服機動作設定

    All manuals and user guides at all-guides.com SWASHPLATE & SERVO MOVEMENT SETTING / 十字盤及伺服機動作設定 As going through these setup procedures, ensure there is none of the controls bind at full travel. Next, please refer below illustrations to ensure the direction of servo movement and swash mixing settings are correct for the controls properly.

  • Page 27: Tail Control And Gyro Setup / 尾舵控制及陀螺儀設定

    All manuals and user guides at all-guides.com TAIL CONTROL AND GYRO SETUP / 尾舵控制及陀螺儀設定 It is recommended to use a Heading Hold Gyro. With a Heading Hold Gyro, you may not use the trim and the revolution mixing function of tail control. First, choose the length of the tail servo arm referring to the manual of the Gyro.

  • Page 28: Setting Up Data For Your Reference / 設定參考值

    All manuals and user guides at all-guides.com SETTING UP DATA FOR YOUR REFERENCE / 設定參考值 The following is the setting up data of pitch curve and throttle curve for your reference only. Please ask experienced pilot to help you if you have never done this before. 下列螺距與油門設定數值，僅提供您參考用。如果您是一位新手，建議您可求助於專業雷虎科技經銷商或有經驗的同...

  • Page 29: Blade Tracking Adjustment / 主旋翼軌跡調整

    All manuals and user guides at all-guides.com BLADE TRACKING ADJUSTMENT / 主旋翼軌跡調整 CAUTION / 警告 For safety, ensure to keep a safe distance from the helicopter at least 5 meter (15 feet) while making tracking adjustment. 安全起見，進行主旋翼軌跡調整時，請至少與直昇機保持5米（15呎）的安全距離。 color tape / 色標貼 Out of Track / 雙槳...

  • Page 30: Setting Up Of Linkage / 連桿設定

    外或傷害，不負任何法律上的責任。 battery and any injury caused by the battery. Thunder Tiger and its duly authorized distributors assume no liability for damage that could occur by the improper using of the battery.

  • Page 31: Heli Accessories / 選購配件

    All manuals and user guides at all-guides.com HELI ACCESSORIES / 選購配件 Ball Link Reamer ( Ø3.8mm) 球頭絞刀 Item No. / 料號：1198 Step 1 / 步驟一 1. Attach the Ball Link to the Reamer. 2. Make sure that the Ball Link is perpendicular to the reamer as shown.
  • Page 32 Blade Balancer 主旋翼平衡器 Item No. / 料號：1077 INTRODUCTION 產品簡介 Thunder Tiger Blade Balancer is a multi-function balancer for your blades. You do the balancing job before putting the blades onto the heli so that you get rid of the vibration problem. Please reviewing the manual thoroughly that you grasp the function of the balancer.
  • Page 33 All manuals and user guides at all-guides.com HELI ACCESSORIES / 選購配件 Blade Balancer 主旋翼平衡器 Item No. / 料號：1077 USERS GUIDE 使用說明 Dynamic Balance 動平衡 1. Open the Blade Rack. 2. Attach the Seesaw Bridge with the Bearing Lock. 打開旋翼架 將蹺蹺板以軸承扣固定 Blade Rack and mark at the same side 旋翼架與記號線在同側...
  • Page 34 All manuals and user guides at all-guides.com HELI ACCESSORIES / 選購配件 Blade Balancer 主旋翼平衡器 Item No. / 料號：1077 STORAGE 攜帶與收藏 The Seesaw Bridge can be put inside the base for easy storage. 蹺蹺板可以卸下並收藏於基座內 RECOMMENDED BALANCING PROCESS 平衡執行流程 The following is the recommended balancing process to correct the position of the C.G.
  • Page 35 Training Gear 直昇機練習架 Item No. / 料號：1079 INTRODUCTION 產品簡介 For novice consideration, the Thunder Tiger Training Gear is the best learning partner. It protects the heli from the possibilities of turning over, and makes the heli survive from certain mistakes.
  • Page 36 All manuals and user guides at all-guides.com HELI ACCESSORIES / 選購配件 ACE RC T3AC Balance Charger for Li-Po Battery T3AC平衡功能鋰電池專用充電器 Item No. / 料號：2536 The ACE RC T3AC BALANCE CHARGER is specifically-designed for charging 2-cell and 3-cell Li-Po battery packs. The compact-size charger features built-in switch adaptor for input power source and individual cell balancing function for safe charging.

  • Page 37: Spare Parts / 零件包

    All manuals and user guides at all-guides.com SPARE PARTS / 零件包 (20) (20) PV0048 PV0049 PV0059 PV0234 PV0236 BALL BEARING, d4xD8xW3(2) BALL BEARING, d3xD8xW4(2) BALL BEARING, d5xD11xW5(2) NUT(20), M2 LOCK NUT(20), M3 軸承組, d4xD8xW3(2) 軸承組, d3xD8xW4(2) 軸承組, d5xD11xW5(2) 六角螺帽(20),M2 止鬆螺帽(20), M3 (20) PV0257 PV0722...
  • Page 38 All manuals and user guides at all-guides.com SPARE PARTS / 零件包 (20) (20) (20) (20) (20) PV0773 PV0777 PV0778 PV0775 PV0776 TAPPING SCREW (W/WASHER), M2x10 SOCKET SCREW(20), M2x14 SOCKET SCREW(20), M2x16 SOCKET SCREW(20), M2x8 SET SCREW(20),M2x10 圓頭墊圈自攻螺絲, M2x9 內六角螺絲, M2x14 內六角螺絲, M2x16 內六角螺絲, M2x8 內六角螺絲, M2x10...

  • Page 39: Exclusive Spare Parts Belt-Driven / 皮帶版專用零件包

    All manuals and user guides at all-guides.com SPARE PARTS / 零件包 (24) (26) PV1232 PV1234 PV1235 PV1239 PV1240 FRAME SPACER TAIL BOOM BRACKET BUTTON HEAD SOCKET SCREW SET SCREW PACK FOR TAIL UNIT MOTOR MOUNT 機身支柱 尾管固定座 M2半圓頭螺絲組 尾座螺絲組 馬達座 PV1241 PV1245 PV1246...

  • Page 40: Exclusive Spare Parts : Torque-Tube / 軸傳版專用零件包

    All manuals and user guides at all-guides.com EXCLUSIVE SPARE PARTS-TORQUE-TUBE / 軸傳板專用零件包 PV1081 PV1154 PV1157 PV1159 PV1160 BEARING d7xD13xW4 TAIL ROTOR GRIP SCREW TORQUE TUBE END SHAFT DAMPER d8xD11x6 TAIL ROTOR SHAFT SET 滾珠軸承 d7xD13xW4 尾旋翼夾片螺絲組 傳動軸接頭 軸傳避震墊圈 d8xD11x6 金屬尾旋翼橫軸組 PV1161 PV1164 PV1228-1...

  • Page 41: Spare Parts List / 零件包表格

    All manuals and user guides at all-guides.com SPARE PARTS LIST / 零件包表格 Description 中文名稱 Part No. Description 中文名稱 Qty Index Page Ball Bearing, d4xd8xw3 滾珠軸承 d4xD8xW3 PV0048 Ball Bearing Set 軸承組 HMV840ZZY 8,14 PV0049 Ball Bearing Set HMV830ZZY Ball Bearing, d3xd8xw4 滾珠軸承...
  • Page 42 All manuals and user guides at all-guides.com SPARE PARTS LIST / 零件包表格 Description 中文名稱 Part No. Description 中文名稱 Qty Index Page Ball Bearing, d2xd5xw2.5 PV0770 Ball Bearing Set 軸承組 HMV520ZZWY 滾珠軸承, d2xD5xW2.5 PV0771 Bearing HMV940ZZY Bearing, d4xD9xW4 滾珠軸承組 滾珠軸承, d4xD9xW4 PV0773 Tapping Screw 圓頭墊圈自攻螺絲組...
  • Page 43 All manuals and user guides at all-guides.com SPARE PARTS LIST / 零件包表格 Description 中文名稱 Part No. Description 中文名稱 Qty Index Page BK1499 Metal Flyabar Control Arm-1 金屬穩定翼轉座-1 Metal Flyabar Control Arm-2 BK1500 金屬穩定翼轉座-2 Set Screw, M3x3 HME3-3B 無頭內六角螺絲 M3x3 Counter Screw, M1.6x6 圓頭十字螺絲...

  • Page 44: Exclusive Spare Parts List Belt-Driven / 皮帶版專用零件包表格

    All manuals and user guides at all-guides.com EXCLUSIVE SPARE PARTS LIST BELT-DRIVEN / 皮帶版專用零件包表格 Description 中文名稱 Part No. Description 中文名稱 Qty Index Page Belt, MXL-3t 413T 皮帶MXL-3t 413T PV0735 Tail Drive Belt 皮帶 BK1073 PV0774 Shouldered Screw BK1481 Washer, Φ2xΦ3.7x0.5t 螺絲墊片, φ2xφ3.7x0.5t 圓頭十字軸套螺絲...

  • Page 45: Exclusive Spare Parts List Torque-Tube / 軸傳版專用零件包表格

    All manuals and user guides at all-guides.com EXCLUSIVE SPARE PARTS LIST TORQUE-TUBE / 軸傳版專用零件包表格 Description 中文名稱 Part No. Description 中文名稱 Qty Index Page Shouldered Screw ,M2x9 圓頭軸套螺絲 ,M2x9 PV1081 Tail Rotor Grip Screw 尾旋翼夾片螺絲組 HNU2-9Z PV1154 Torque Tube End Set BK1569 Torque Tube End 驅動軸接頭...

  • Page 46: Option Parts / 選配零件

    All manuals and user guides at all-guides.com OPTION PARTS / 選配零件 PV0706 PV0730 PV0731 PV0828 PV0830 FLAP DAMPER(70°) PINION 10T(2)(FOR 2.3mm SHAFT) PINION 15T SETTING WEIGHT PINION 11T (d2.3) 避震墊圈(70°) 驅動齒輪 10T 驅動齒輪 15T 重鎚 驅動齒輪11T (d2.3) PV0831 PV0832 PV0833 PV1244 PV1244-G PINION 11T (d3.17)

  • Page 47: Accessory / 其他相關產品

    All manuals and user guides at all-guides.com POWER & ELECTRONICS / 動力及電子配件 8073 8079 AQ0843 AQ0835 8072 TG6000GYRO W/C0915 SERVO TG7200 HEADING LOCK GYRO TG6100M GYRO W/E-CCPM MIXER ANTI-INTERFERENCE RING TG6000 GYRO TG6000 陀螺儀+尾舵伺服機 TG7200 鎖定式電子陀螺儀 TG6100M 陀螺儀含混控版 防磁環 TG6000 鎖定式陀螺儀 AQ0836 AQ0837 8117...

  • Page 48: Exploded View / 爆炸圖檢索

    All manuals and user guides at all-guides.com EXPLODED VIEW / 爆炸圖檢索 MAIN ROTOR HEAD PV1270 PV0783 PV0781 PV0829 PV1270 PV0803 PV0781 PV0236 PV0809 PV0707 PV0257 PV0769 PV0754 PV0801 PV0755 PV1269 PV0829 PV1270 PV0803 PV0781 PV0236 PV0783 PV0805 PV0837 PV0844 PV0804 PV0838 PV0805 PV0838...
  • Page 49 All manuals and user guides at all-guides.com EXPLODED VIEW / 爆炸圖檢索 Belt-driven Version PV1224 MAIN FRAME PV1272 (Torque-tube) PV1228 PV1230 (Belt-driven) PV1233 PV1276 PV1247 PV1228-1 PV1274 PV1273 PV1275 PV1231 PV1235 PV1227 PV1271 (Torque-tube) PV1229 PV1267 (Belt-driven) PV1225 2382 PV1271 (Torque-tube) PV1267 (Belt-driven) PV1235 PV1240...
  • Page 50 All manuals and user guides at all-guides.com EXPLODED VIEW / 爆炸圖檢索 TAIL UNIT PV1159 PV1278 PV1273 PV0749 PV0842 PV0770 PV0748 PV0820 PV0749 PV0742 PV1239 PV0739 PV0777 PV1281 PV0781 PV1239 PV0770 PV1281 PV0762 PV0770 PV0784 PV0781 PV0741 PV0755 PV0751 PV0739 PV0784 PV0777 PV0753 PV0742...
  • Page 51 All manuals and user guides at all-guides.com EXPLODED VIEW / 爆炸圖檢索 TAIL UNIT PV0776 PV1238 PV0814 PV0770 PV0820 PV1237 PV0770 PV0842 PV0749 PV0742 PV1239 PV0739 PV0777 PV1281 PV0781 PV1239 PV0770 PV1281 PV0770 PV0784 PV0781 PV0741 PV0739 PV0784 PV0762 PV0777 PV0755 PV0751 PV0742 PV0753...
  • Page 52 7. 一體式金屬主軸軸承座及伺服機座 8. Metal & Carbon Light Tail Case/ Metal Grips 8. 金屬/碳纖維輕量化尾殼/金屬夾片 9. 高效率散熱孔設計機頭罩 9. Canopy With Integrated Heat Sink For Efficient Thermal Dissipation 10. 標準搭配3D版輕量化平衡翼 10. Equipped With Lightweight Paddles for 3D (4.4gr) THUNDER TIGER manufactured by http://www.thundertiger.com JK0240...

This manual is also suitable for:

47124713

Table of Contents