Processor And Option Boards - Compaq ProLiant 4500 Maintenance And Service Manual

Processor and Option Boards

Figure 2-11. Removing the Processor and Option Boards
To Replace Option Board
1. Extend server from the rack to the locked position.
2. Remove cover plate.
3. Remove Y brace.
4. Remove any cables connected to the option board.
5. Remove retaining screw and pull board straight out.
6. Reverse steps for option board installation.
To Replace Processor Board
1. Extend server from the rack to the locked position.
2. Remove cover plate.
3. Remove Y brace and card bracket.
5. Pull board straight out.
6. Reverse steps for processor board installation.
Removal and Replacement Procedures
Maintenance and Service Guide
2-13