REMOVAL AND
REPLACEMENT PROCEDURES
Server Access
WARNING: High voltage is present. Extreme care must be taken when
running the Rack-Mountable Server System without the system unit cover
on.
Extending the Server/Removing the Cover Plate
Figure 2-1. Extending the Server from the Rack and Removing the Cover Plate
1. Unscrew the front panel thumbscrews (4) to release the server from the rack.
2. Using the handles, pull the server out from the rack to the locked position.
WARNING: Never extend more than one piece of equipment at a time. Doing
so could cause the rack system to become unstable.
3. Turn the 1/4-turn release screws (3) on the front panel.
4. Slide the cover plate back and up.
Removal and Replacement Procedures
Maintenance and Service Guide
2-3