Power Supply - Compaq ProLiant 4500 Maintenance And Service Manual

Figure 2-13. System Board Connectors

Power Supply

1. Turn the power off and disconnect the power cord from the rear of unit.
2. Extend the server from the rack to the locked position and remove cover plate.
3. Remove the Y brace.
4. Disconnect the power supply signal cable from the system board.
5. Disconnect all power connector from boards and peripheral devices.
Figure 2-14. Removing the Power Supply Power Connector and Switch
6. Remove interlock power switch bracket retaining screws (2).
Removal and Replacement Procedures
Maintenance and Service Guide
2-15