Removing The Entire Power Supply Unit - Asus AP8000 Hardware Reference Manual

Dual pentium® iii xeon corporate server

Table of Contents

Screwdriver

Power Supply Frame

IMPORTANT

When installing the power supply, reverse the steps: Insert the

power supply modules halfway into the chassis, secure the circled

screws, push the power supply modules in place, secure the boxed

screws as well and the 8 screws on the back of the chassis, and

then connect the power cord.

IV. Hardware Setup

AP8000 Hardware Reference Guide

Removing the

Entire Power

Supply Unit

Remove the two boxed screws,

slide out the power supply mod-

ules with the support brace to the

insertion position and then re-

move the two circled screws.

NOTE: A long screw-

driver is required to reach

into the chassis.

After the support brace is re-

moved, the power supply mod-

ules and the frame can be re-

moved from the chassis.

Table of Contents