Table of Contents
Advertisement
60
6
Press down the retainer lever to lock the CPU in place (2).
7
Apply approximately 0.1ml of the thermal grease compound to
the top of the CPU.
8
Move the handle of the retaining clip slightly in a direction away
from the heatsink.
9
Align the heatsink fan assembly to the heatsink base (1).
Note: Make sure to install both sides of the retention clips.
10 Secure the retaining clip to the tabs in the heatsink base by
aligning the clip holes over the tabs(2).
3 System upgrade
Advertisement
Table of Contents
