Table of Contents
Advertisement
Upgrading the CPU
This section includes instructions for installing and removing a CPU and
heatsink assembly.
To install the heatsink fan assembly and CPU
The mainboard supports dual 940 processor socket for AMD Opteron™
processors. The system comes bundled with only a single AMD Opteron
processor leaving one CPU socket empty. You have the option to
purchase an extra CPU for your system.
Important: Before you install a new CPU, make sure that you are
using the same type of CPU's with identical stepping and running
at the same frequency.
1
Observe the ESD precautions and pre-installation procedures
described on page 35.
2
Locate the CPU socket on the mainboard.
3
Pull the CPU socket retainer lever to the fully open, upright
position.
4
Remove the CPU from its protective packaging.
5
Align the CPU to its socket, making sure that pin 1 (indicated by
the notched corner) of the CPU connects to hole 1 of the socket
(on the bottom right corner), then insert the CPU into the socket
(1).
59
Advertisement
Table of Contents
