Panasonic AWRP50N - REMOTE CAMERA CONTROLLER Operating Instructions Manual page 20

Network settings
Setting the port number
Set the port number for the remote camera.
On the [SYSTEM] menu, select [CAM PORT] and
display [PORT:CAM1] to [PORT:CAM100], and then
operate the F2 dial to set the port number.
1 . P O R T :C AM 1
Setting the MAC address
On the [SYSTEM] menu, select the [NETWORK]
menu, and display [MAC ADDRESS].
4 . M A C A D D R E S S
▼
8 0
▲
20