Getting Started; Setup Overview - DirecTV HAH-SA Owner's Manual

You may connect a second
DIRECTV Receiver to the unused
LNB output. These instructions
also apply to an additional
receiver.

Setup overview

This chapter explains how to:
• Connect the DIRECTV
Receiver (this page).
• Connect your DIRECTV Receiver to your TV (see page 3).
• Find antenna azimuth and elevation settings for your location (see page 4).
• Test the DIRECTV System operation (see page 5).
How to use this manual
This manual uses these typographical conventions to help clarify instructions:
Text Example
Click Cancel.
Highlight the Messages
button.
Press the button.
INFO
Connect a pair of A/V
cables to the
AUDIO IN
Highlight the Options
Display the
MAIN MENU
At this point, you should have:
• Mounted the DIRECTV Satellite Antenna and pointed it in the general
direction of the satellite.
• Grounded the antenna as described in your antenna installation instructions.
• Attached RG-6 coaxial cable(s) to the antenna LNB connector(s).
• Routed the other end of the antenna cable to the back of your DIRECTV
Receiver.
• Placed the DIRECTV Receiver accessible to a telephone modular jack.
• Inserted the access card into your DIRECTV Receiver.
Ensure that you have completed these procedures, then continue to the next
page to begin installing the DIRECTV Receiver.

Getting Started

®
Satellite Dish Antenna to your DIRECTV
On-screen command buttons that execute an action.
Selections or other option buttons within a menu
pane.
Remote control buttons, or receiver front panel.
Names of equipment cable connections on
equipment.
jack.
Menu tab names.
tab.
. Menu and pane names, names of pop-up and
sub-menu panes.
Description
Getting Started
1
1