Using Turbotune; Setting Turbotune Channels; Renaming Turbotune Groups - DirecTV HAH-SA Owner's Manual

Using TurboTune

Press the button to cycle
TURBO
through Turbo1, Turbo 2, and
Turbo 3 program groups when the
TurboTune guide is on-screen.
Setting TurboTune
channels:
Renaming TurboTune
groups:
™ The TurboTune
Three groups of nine of your favorite channels are available as Turbo 1, Turbo 2,
and Turbo 3.
1. Press the
TURBO
shown in the figure below.
2. Use the
TurboTune grid.
3. Press
SELECT
1. Select
Guide Options
tab or press the
pane below the TurboTune Menu.
Setup
2. Highlight an unassigned channel box (Add Channel) and press
3. Choose the desired channel in the setup box shown below using
the paddle or the
remote control buttons to enter specific channel number.
Each nine-channel group can be renamed as anything you choose, using up to
10 letters, numbers, spaces, and punctuation. From the TurboTune grid:
1. Highlight the grid name (Turbo 1, Turbo 2, or Turbo 3) shown above.
2. Press
SELECT
3. Use the on-screen keyboard to enter the new name.
4. Highlight and
Use the
Cancel
™
feature is a quick access guide to 27 of your favorite channels.
button on the remote control to show the TurboTune grid
paddle to highlight an unused position (Add Channel) of the
to add the channel you are watching to the TurboTune menu.
from the
MAIN MENU
button on the remote control then
TURBO
button. You can also use the numeric
CHANNEL(CH)
.
SELECT the OK menu button.
or menu buttons to redo the entry or cancel the change.
Clear
, then use the
Set Turbo
the
SELECT
SELECT
Using program guides
menu
.
21