NUANCE OMNIFORM FILLER 5.5 FOR DESIGNING AND DISTRIBUTING FORMS Manual page 14

Click Install OmniForm
Filler to start installation.
Click OmniForm Filler
Release Notes to read
important last-minute
information before
installing.
14
Installation and Setup
To install OmniForm Filler:
1. Insert OmniForm Filler's CD-ROM in the CD-ROM drive.
The setup program should start automatically. If it does not start, locate your
CD-ROM drive in Windows Explorer and double-click the Setup.exe program
at the top-level of the CD-ROM.
The first setup screen looks like this:
2. Click Install OmniForm Filler 5.5 to start installation.
3. Follow the installation instructions on each screen.
By default, OmniForm Filler files are installed in this folder location:
c:\program files\scansoft\omniform filler 5.5. You can select a different
location if desired.
Note
If you are experiencing a problem with OmniForm Filler after installation,
sometimes uninstalling and then reinstalling OmniForm Filler will solve
the problem. See page 94 for more information.