PRESONUS FIRESTUDIO TUB - V2.0 User Manual page 29

CONTROLS AND CONNECTIONS
 Master Mute and Solo Clear
Mixer Section

Channel Pan Sliders

Link Buttons

Channel Faders

Channel Mutes and Solos
 Input Selectors
Clears All Active Channel Mutes or Solos
The Master Mute and Solo Clear buttons are only active when a channel's mute
or solo button is active.
Moves the Channel's Audio Left/Right in the Stereo Field
Double-clicking the slider returns the pan to center.
Links the Adjacent Channels as a Stereo Pair
When channels are linked, changing either channel's level changes both channels'
levels, and the signals are panned hard left and right.
Changes the Channel's Audio Level
Move the Channel fader up and down to increase and decrease the channel's
audio level.
The amount of boost or attenuation, measured in decibels, is displayed below the
Channel Fader. The range is from –∞ to +6 dB.
A virtual LED meter to the right of each fader displays the postfader level of the
channel's audio.
The peak value, in dBFS, of the channel's audio level is displayed directly above
each channel's virtual LED meter.
Adds the Channel to the Mute or Solo Bus
Muting a channel silences the channel's audio. Soloing a channel mutes all other
unsoloed channels.
Changes the Source of the FireStudio Tube Mixer Channels
Choosing "No Input" will hide the channel.
"Inputs" are your hardware inputs (Mic, Line, and Tube).
"Playback" are your software DAW outputs
26 | PreSonus 2008
.