Download Print this page
Dacor ILHSF10 Planning Manual

Dacor ILHSF10 Planning Manual

In-line blower
Hide thumbs Also See for ILHSF10:

Advertisement

Document # PG09 - 002
All tolerances ±1/16" (±1.6 mm) unless otherwise noted.
Air Flow
6"
(15.2 cm)
13"
(33.0 cm)
Specifications subject to change without notice.
Install all appliances according to accompanying installation instructions.
ILHSF8, ILHSF10
3/16" (0.5 cm)
6 ½"
(16.5 cm)
16 ½"
(41.9 cm)
13 ¼"
(33.6 cm)
13"
8" REF
(33.0 cm)
(20.3 cm)
ILHS8 OvErALL DImENSIONS
In-line Blower
2 1/4"
(5.7 cm)
8" REF
(20.3 cm)
8 3/16"
(20.8 cm)
3/16" (0.5 cm)
9 1/8"
(23.2 cm)
15 1/4"
(38.7 cm)
Air Flow
16"
(40.6 cm)
8 1/4"
(21.0 cm)
15 3/4"
(40.0 cm)
ILHSF10 OvErALL DImENSIONS
www.Dacor.com
warning
Observe all governing codes and ordinances
during planning and installation. Contact your local
building department for further information.
This appliance must be installed in accordance
with the accompanying installation instructions.
19"
(48.3 cm)
10" REF
(25.4 cm)
Phone: (800) 793-0093
Revised 12/09/09 Page 1/2
PLANNING
GUIDE
2 1/4"
(5.7 cm)
10" REF
(25.4 cm)
10 3/4"
(27.3 cm)
9.5

Advertisement

loading

Summary of Contents for Dacor ILHSF10

  • Page 1 10” REF (40.6 cm) (25.4 cm) (25.4 cm) 8 1/4” 10 3/4” (21.0 cm) (27.3 cm) 15 3/4” (40.0 cm) ILHSF10 OvErALL DImENSIONS Specifications subject to change without notice. Install all appliances according to accompanying installation instructions. www.Dacor.com Phone: (800) 793-0093...
  • Page 2 Knock-out above specifications vary from the label on the blower, use the data on the blower label. install this blower only with approved Dacor hoods/ vents. See the hood/vent installation instructions to determine suitability. all models are thermally protected...

This manual is also suitable for:

Ilhsf8