Dacor IVS1 Installation Instructions Manual
Power packs
Hide thumbs
Also See for IVS1:
- Installation instructions manual (12 pages) ,
- Use and care manual (12 pages) ,
- Use & care manual (8 pages)
Table of Contents
Advertisement
SAVE AND READ THESE INSTRUCTIONS
TESTED IN ACCORDANCE WITH THE LATEST EDITION OF ANSI Z21.1 STANDARD FOR
HOUSEHOLD COOKING APPLIANCES.
CONVENTIONS USED IN THESE INSTRUCTIONS
WARNINGS:
Must be followed carefully to avoid personal injury.
IMPORTANT:
Must be followed carefully to avoid damage.
NOTES:
Contain helpful hints and tips to facilitate the installation.
IMPORTANT
1. Before beginning installation, please thoroughly read and become familiar with these instructions.
2. Installation and service must be completed by a qualified installer or service agency.
3. Installer: Please leave these Installation Instructions with the owner.
4. Owner: Please keep these instructions for local electrical inspector's use and for future reference.
5. Read the accompanying Use & Care Manual prior to operating this appliance.
TABLE OF STEPS
STEP 1
Planning the installation
STEP 2
Electrical connections
STEP 3
Installing the Power Pack
STEP 4
Verifying proper operation
Part No. 65278 Rev. A
Installation Instructions
Power Packs
Page 2-3
Page 4-5
Page 5
Page 5
Advertisement
Table of Contents
Related Manuals for Dacor IVS1
Summary of Contents for Dacor IVS1
-
Page 1: Installation Instructions
Installation Instructions Power Packs SAVE AND READ THESE INSTRUCTIONS TESTED IN ACCORDANCE WITH THE LATEST EDITION OF ANSI Z21.1 STANDARD FOR HOUSEHOLD COOKING APPLIANCES. CONVENTIONS USED IN THESE INSTRUCTIONS WARNINGS: Must be followed carefully to avoid personal injury. IMPORTANT: Must be followed carefully to avoid damage. NOTES: Contain helpful hints and tips to facilitate the installation. -
Page 3: To Reduce The Risk Of A Range Top Grease Fire
WARNINGS: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: a) Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer. b) Before servicing or cleaning unit, switch power off at service panel and lock the service disconnecting means to prevent power from being switched on accidentally. -
Page 4: Installation Planning
Installation Planning The Dacor Power Packs are designed for installation inside custom hood canopies. Proper installation of the Power Pack is directly related to the custom canopy material construction. Closely follow the warnings concerning the instatlltion of the Power Pack within a combustible and non-combustible hood canopy. - Page 5 ATD10 Overall Dimensions Isometric View NOTES: 1. Dacor transition model number ATD10 shown in figure 3 is available from your local Dacor dealer. 2. Power Packs are effective when installed with 60 equivalent straight feet of ducting. 3. Power Packs ship with a back-draft damper installed in the collar of the unit.
-
Page 6: Electrical Connection
STEP 2 Electrical Connection WARNINGS: 1. Ensure that the power supply is disconnected before proceeding. 2. Verify that the power supply matches the ratings found on the appliance data plate before proceeding. 3. The complete appliance must be properly grounded at all times when electrical power is applied. 4. -
Page 7: Step 3 Installing The Ivs
2. Check the electrical connections to ensure that the installation has been completed correctly. 3. Repeat the above tests. 4. If the appliance still does not work, contact an authorized DACOR service company at (800) 772-7778, or at www.dacor.com. Do not attempt to repair the appliance yourself. - Page 8 Web Site: www.dacor.com For a Dealer/Service: (800) 772-7778 Corporate Phone: (800) 793-0093...