Enabling Agents In Resource Database (Ibm Lotus Notes/Domino Versions 7.X And 8.0.X); Figure 10: Listing The Agents In Domino Designer 7.0 - Cisco TELEPRESENCE MANAGEMENT SUITE EXTENSION - INSTALLATION GUIDE FOR IBM LOTUS NOTES 11.3.1 Installation And Getting Started Manual

4. When the wizard pops up, click Next, and then Assign an existing certificate. You can now see
the certificate that was created in step 1, click Next to see information about the certificate, and
click Next again to complete the installation. Cisco TMS is now configured for HTTPS.
To set up the Notes server, the certificate chain must be added to the Java certificate store:
1. Export the Cisco TMS server certificate to a .cer file. Copy the file to the Domino server, for
example c:\certificates\tmscertificate.cer.
2. Log in to the Domino server.
3. Open a command prompt on the Domino server.
4. Change directory to <Domino directory>\jvm\lib\security, for example cd Program
Files\Lotus\Domino\jvm\lib\security.
5. Import the certificate by writing ..\..\bin\keytool.exe -import -trustcacerts -keystore cacerts -alias
<myname> -file <location of certificate file>\tmsserverauth.cer. It is advisable to give the certificate
a proper alias (for example TMS_server_certificate).
6. Restart the Domino server.
Enabling agents in Resource Database (IBM Lotus
Notes/Domino versions 7.x and 8.0.x)
1. Start Lotus Domino Designer and open the Resource Reservations Database that you created
earlier (normally called ―Video Conference Resources‖) by going to File > Application > Open...,
selecting the server where the database was created, and then selecting the database from the
list.
2. Expand the Shared Code item from the view in the left frame.
3. Click on Agents.
4. The main frame lists all the agents in the database. Five or six (depending on the Domino version)
of the agents have red and yellow icons next to them, marking them as disabled.

Figure 10: Listing the agents in Domino Designer 7.0

5. Hold down the Control (Ctrl) key, and highlight Scheduled Synchronizer and TMS Trigger.
Then click the Enable button at the top of the list. You are prompted for the server on which the
Cisco TMS Extension for IBM Lotus Notes – Installation and getting started guide
Installation
Page 17 of 45