Cisco SMART BUSINESS COMMUNICATIONS SYSTEM - FEATURE REFERENCE GUIDE 12-2010 Feature Reference page 5

Users/Phones/Extensions
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Paging groups X
Intercom (with or without X
mute)
Dialable intercom (with or X
without mute, overlay option)
Whisper intercom X
Single Number Reach X
(SNR)
Conferencing X
Ad hoc conferencing X
Meet-me conferencing X
cBarge and privacy X
Basic automatic call X
distribution
Night service X
Phone services URL X
provisioning
Fax support X
T.37 fax to email
T.38 fax relay X
Arc Express 2.1 X
compatibility
FXO hook flash X
Advanced FXO port settings
Busy lamp field (BLF) X
Line monitoring X
Trunk monitors X
Multiple extensions per X
phone
Floating/phantom extensions
Extension mobility
Email and voicemail
Notifications
Shared line X
2 calls per line X
Phone display header X
Overlay DN X
X Cisco Configuration Assistant 2.2(5) adds support for combined
paging groups with one level of nesting
X Including multiple intercom support and ability to configure intercom on
nonprimary buttons
X Dialable intercom on primary button is not supported.
X Cisco Configuration Assistant 2.2(5) adds whisper intercom support on
all buttons except the primary button.
X Cisco Configuration Assistant 3.0 adds support for SNR timeout
settings.
X Cisco Configuration Assistant 3.0 adds support for enabling and
disabling conference join and leave tones
X For UC540 system, max number of conferences is 24 (
concurrent users per conference)
to 8 concurrent users per conference)
X For UC540 system, max number of conferences is 6 (
concurrent users per conference)
to 32 concurrent users per conference)
X Cisco Configuration Assistant 2.2(5) adds support for configuring
cBarge with or without Privacy button (requires shared octo-line
extensions on phones)
X
X Support for night service schedule, night service bell, night service call
forward, and night service toggle code
X
X
X Support for enabling voice mailboxes to receive incoming faxes, voice
and fax detection, fax printing, and integration with voicemail
notifications or IMAP to allow users to receiving email notifications with
faxes attached in TIFF format. Administrators can use the default
system prompts for voice and fax detection or record a custom
prompt.
X Supported for Cisco Certified SIP trunk providers. Generic SIP trunk
providers supported in Cisco Configuration Assistant 2.4.
X Arc Express client must be configured separately.
X
X Configure advanced FXO port settings, including supervisory
disconnect, audio, and timer settings.
X
X
X
X
X Create extensions that are not associated with any phone. Within
Cisco Configuration Assistant, these are called floating extensions.
X Support normal and shared line only.
X
X
X
X Cisco Configuration Assistant 2.2(5) adds support for editing the
description displayed in the phone header
X Cisco Configuration Assistant 2.5 adds support for configuring an
Feature Description Guide
up to 8
. For UC 560 system, this limit is 56 (
up to 32
. For UC560 system, this limit is 12 (
Page 5 of 27
up
up