Copy Job To The Hold Queue Of The Main Body; Delete Job - Konica Minolta bizhub PRESS C6000 User Manual

6.4 Job Operation in the Main Body (Main Body Hold/HDD)

Copy Job to the Hold Queue of the Main Body

This section describes how to copy the job in HDD of the main body to the hold queue of the main body using
[Output] function.
1
Click [Main Body Hold/HDD] tab of the Job Centro Screen.
[Main Body Hold/HDD] screen appears.
% When the user authentication/account track is set to the main body and you click [Main Body
Hold/HDD] tab, [User Auth/Account Track] screen appears. In this case, [Main Body Hold/HDD]
screen appears after authentication. For the authentication operations, refer to page 5-3.
2
From [Folder Name] list, select the folder where the job to copy is saved.
On [HDD Job], the jobs in the selected folder from the list are displayed.
% When the password is set to the folder, [Folder Password] screen appears. In this case, enter the
password, and click [OK].
3
Select the job to copy from [HDD Job] list.
The selected job is highlighted.
% You can not copy when you select multiple jobs.
4
Click [Output].
[Output] screen appears.
% You can also operate by using [Output] from the right click menu.
% You can also operate by using [Job Operations] menu - [Output].
5
From [Output Method], select [Main Body Hold] and click [OK].
The job is copied to the hold queue of the main body.

Delete Job

This section describes how to delete the job using [Delete] function from [HDD Job] list.
1
Click [Main Body Hold/HDD] tab of the Job Centro Screen.
[Main Body Hold/HDD] screen appears.
% When the user authentication/account track is set to the main body and you click [Main Body
Hold/HDD] tab, [User Auth/Account Track] screen appears. In this case, [Main Body Hold/HDD]
screen appears after authentication. For the authentication operations, refer to page 5-3.
2
From [Folder Name] list, select the folder where the job to delete is saved.
On [HDD Job], the jobs in the selected folder from the list are displayed.
% When the password is set to the folder, [Folder Password] screen appears. In this case, enter the
password, and click [OK].
3
Select the job to delete from [HDD Job] list.
The selected job is highlighted.
% You can delete the multiple jobs.
4
Click [Delete].
Confirmation screen appears.
% You can also operate by using [Delete] from the right click menu.
% You can also operate by using [Job Operations] menu - [Delete].
5
Click [OK].
The selected job is deleted.
% When you select the multiple jobs, all of those are deleted at a time.
% It might take time to reflect the deleting result when the job takes time to be deleted.
IC-601
6
6-43