Cannot Print Properly With Automatic Duplex Printing - Canon 4496B008AA Advanced Manual

Advanced Guide >
Troubleshooting
U332

Cannot Print Properly with Automatic Duplex Printing

Check: Is the paper size or media type appropriate?
Make sure that the actual size of the paper is suitable for automatic duplex printing.
The sizes of media suitable for automatic duplex printing are A4, Letter, A5, and B5.
Load paper of suitable size, then press the
Make sure that the Page Size or Paper Size setting matches the actual size of the paper with a
size suitable for automatic duplex printing.
First, check the Page Size setting in the application software you are printing from.
Then, check the Page Size setting on the Page Setup sheet in the printer driver setup window.
Note
Duplex printing may not be available depending on the version of the application software.
Make sure that the type of loaded paper is suitable for automatic duplex printing on the Main
sheet in the printer driver setup window.
To switch to manual duplex printing, follow the procedure below.
Open the printer driver setup window, clear the Automatic check box on the Page Setup sheet, and
reprint.
When performing manual duplex printing, note the following.
If you are printing three or more pages of a document with manual duplex printing, one side
of all sheets of paper will be printed first. Turn over the paper and reload the paper in the
printer, and then the reverse side of all sheets of paper will be printed. Be careful not to
change the order of paper in the stack.
The procedure for reversing the paper varies depending on the staple side and printing
orientation. Follow the on-screen instructions.
> Cannot Print Properly with Automatic Duplex Printing
RESUME/CANCEL button on the printer.
Page top