Canon 4496B008AA Advanced Manual page 385

Six flashes:
The Inner Cover is opened.
Seven flashes:
Ink tank is not installed in the correct position.
Eight flashes:
Ink absorber is almost full.
Nine flashes:
The printer has not received a response from the
digital camera./The digital camera or digital video
camcorder connected is not compatible with this
printer.
Ten flashes:
Cannot perform duplex printing.
Eleven flashes:
Automatic Print Head Alignment failed.
If the error is still not resolved, the Print Head may
be damaged. Contact the service center.
When you start printing on paper, close the Inner
RESUME/CANCEL button on
Cover, then press the
the printer.
Some ink tanks are not installed in the correct
position. (The lamps on the ink tanks flash.)
More than one ink tanks of the same color are
installed. (The lamps on the ink tanks flash.)
Confirm that the ink tanks are installed in the
appropriate positions.
Routine Maintenance
The ink absorber is almost full.
RESUME/CANCEL button to
Press the printer's
continue printing. Contact the service center.
Check the device connected to the printer.
Printing photos directly is possible only with a
PictBridge compliant device.
A communication time out occurs if an
operation takes too long or if it takes too much
time to send data. This may cancel printing. In
such cases, disconnect and reconnect the
USB cable.
When printing from a PictBridge compliant
device, depending on the model or brand of
your device, you may have to select a
PictBridge compliant print mode on the device
before connecting it to the printer. You may
also have to turn on your device or select Play
mode manually after connecting the device to
the printer. Perform necessary operations
before connecting your device referring to its
instruction manual.
If the error is still not resolved, check if you can
print another photograph.
The size of paper may not be compatible with
automatic duplex printing. The sizes of media
suitable for auto duplex printing are A4, Letter, A5,
and B5. Make sure that the size of the paper
loaded in the printer is correct. Pressing the
RESUME/CANCEL button will eject the paper and
restart printing from the front side of the next
paper. The reverse side of the ejected sheet will
not be printed.
Print Head nozzles are clogged.
RESUME/CANCEL
Press the
the error, and print the nozzle check pattern to
check the status of the Print Head.
Routine Maintenance
Paper of size other than A4 or Letter is loaded
in the Rear Tray.
RESUME/CANCEL
Press the
the error, then load a sheet of A4/Letter-sized
Canon Matte Photo Paper MP-101 with the
printing side (whiter side) facing UP in the
Rear Tray.
For Automatic Print Head Alignment, always
load paper on the Rear Tray.
The Paper Output Slot is exposed to strong
light.
button to dismiss
button to dismiss