FIGURE 2—AMPLIFIER CONNECTIONS 1200T REAR
1
1 MIN
L
BRIDGED
2
MIN
TOP PANEL FEATURES
Control Panel Cover
The gain and filter controls are located
under a control panel cover on top of
the amplifier. The control panel cover
must be removed to gain access to the
gain and filter controls.
© 2004 Directed Electronics, Inc
2, 3
4
5
6
R
FUSE 30A x 3
+ BATT REM
POWER
ONE OHM
Remove/Install
Four Allen-head screws hold the control
panel cover to the amplifier top panel,
one at each corner. They can be
removed with the wrench supplied in
the hardware pack.
7
GND
9 9