Technical Data - WAGNER W 90 Safety Instructions

Spray gun W 90
The following spray substances are not suitable for use:
• Dispersion and latex paints,
• Materials containing strong abrasives,
• Glazes with coarse particles,
• Strippers and caustic solutions,
• Silicate paints.
Use of these spray materials can lead to increased wear or corrosion
damage in the pump area, which are not covered by the Wagner-
Guarantee.

Technical Data

Type
Model
Max. delivery rate
Max. viscosity (run-out time)
Max. pressure spikes
Power source
Power consumption
Double insulation
Cable length
Container capacity
Spray gun weight
Pump cylinder
Piston equipped with
round spray nozzle
Oscillation level
Sound pressure level
Functional Description of the Spray Gun
The spray gun sucks in spray materials. The airless atomisation
results when the spray material is pumped at high pressure through
the swirl system and the nozzle bore. Airless spraying reduces spray
mist and paint loss to a minimum.
0402
W 90
140 g/min
30 DIN-sec.
100 bar
230 V~
40 W
1,8 m
600 ml
1,5 kg
Special alloy
Special steel Ø 4 mm
0,5 mm
2
<2,5 m/s
max. 80 dB(A)
GB
13