Lan Setup - D-Link DIR-505 User Manual

Section 3 - Configuration
Device Name: Allows you to configure the device more easily when your network
is using TCP/IP protocol. Enter a name for your device.
My LAN
Select from the drop-down menu the Operation Mode you would
Connection:
like to use.
IP Address:
Enter the IP address assigned by your ISP.
Subnet Mask:
Enter the Subnet Mask assigned by your ISP.
Gateway Address:
Enter the Gateway assigned by your ISP.
Primary/ Secondary
Enter the Primary and Secondary DNS server IP addresses
DNS Server:
assigned by your ISP. These addresses are usually obtained
automatically from your ISP. Enter the value 0.0.0.0 if you
did not specifically receive these from your ISP.
D-Link DIR-505 User Manual

LAN Setup

84