Access Point Mode - D-Link DIR-505 User Manual

Section 4 - Security
Enable Wireless:
Check the box to enable the wireless function. If
you do not want to use wireless, uncheck the box to
disable all the wireless functions. You may also set up
a specific time range (schedule). Select a schedule
from the drop-down menu or click Add.New to create
a new schedule.
Wireless Mode:
Select Access.Point from the drop-down menu.
Wireless
When you are browsing for available wireless
Network Name:
networks, this is the name that will appear in the list
(unless Visibility Status is set to Invisible, see below).
This name is also referred to as the SSID. For security
purposes, it is highly recommended to change from
the default network name.
802.11 Mode:
Select one of the following:
802.11b.Only - Select if you are only using 802.11b
wireless clients.
802.11g.Only - Select if you are only using 802.11g
wireless clients.
802.11n.Only - Select if you are only using 802.11n wireless clients.
Mixed.802.11g.and.802.11b.- Select if you are using a mix of 802.11g and 11b wireless clients.
Mixed.802.11n.and.802.11g - Select if you are using a mix of 802.11n and 11g wireless clients.
Mixed.802.11n,.802.11g.and.802.11b - Select if you are using a mix of 802.11n, 11g, and 11b wireless clients.
Wireless
Indicates the channel setting for the DIR-505. The Channel can be changed to fit the channel setting for an existing wireless
Channel:
network or to customize the wireless network. If you enable Auto Channel Scan, this option will be grayed out.
Enable Auto The Auto. Channel. Scan setting can be selected to allow the DIR-505 to choose the channel with the least amount of
Channel Scan:
interference.
D-Link DIR-505 User Manual

Access Point Mode

47