Manual Configuration; Wireless Settings; Router Mode - D-Link DIR-505 User Manual

Section 4 - Security
Enable Wireless:
Check the box to enable the wireless function. If you do
not want to use wireless, uncheck the box to disable all the
wireless functions. You may also set up a specific time range
(schedule). Select a schedule from the drop-down menu or
click Add.New to create a new schedule.
Wireless Mode:
Select Router from the drop-down menu.
Wireless
When you are browsing for available wireless networks, this
Network Name:
is the name that will appear in the list (unless Visibility Status
is set to Invisible, see below). This name is also referred to as
the SSID. For security purposes, it is highly recommended
to change from the default network name.
802.11 Mode:
Select one of the following:
802.11b.Only - Select if you are only using 802.11b wireless
clients.
802.11g.Only - Select if you are only using 802.11g wireless clients.
802.11n.Only - Select if you are only using 802.11n wireless clients.
Mixed.802.11g.and.802.11b.- Select if you are using a mix of 802.11g and 11b wireless clients.
Mixed.802.11n.and.802.11g - Select if you are using a mix of 802.11n and 11g wireless clients.
Mixed.802.11n,.802.11g.and.802.11b - Select if you are using a mix of 802.11n, 11g, and 11b wireless clients.
Wireless
Indicates the channel setting for the DIR-505. The Channel can be changed to fit the channel setting for an existing wireless
Channel:
network or to customize the wireless network. If you enable Auto Channel Scan, this option will be grayed out.
Enable Auto The Auto.Channel.Scan setting can be selected to allow the DIR-505 to choose the channel with the least amount of interference.
Channel Scan:
D-Link DIR-505 User Manual

Manual Configuration

Wireless Settings

Router Mode

45