Access Point Mode - D-Link DIR-505 User Manual

Section 2 - Installation

Access Point Mode

In the Access Point mode, the DIR-505 acts as a central connection point for any computer (client) that has a 802.11n or
backward-compatible 802.11g wireless network interface and is within range of the AP. Clients must use the same SSID (wireless
network name) and channel as the AP in order to connect. If wireless security is enabled on the AP, the client will need to enter
a password to connect to the AP. In Access Point mode, multiple clients can connect to the AP at the same time.
Access Point Mode
Router
DIR-505
D-Link DIR-505 User Manual 9