Cisco IPS-4240-K9 - Intrusion Protection Sys 4240 Installation Instructions Manual page 7

Chapter 2 Installing IPS-4240 and IPS-4255
Use the supplied screws to attach the appliance to the equipment rack.
Step 2
To remove the appliance from the rack, remove the screws that attach the appliance to the rack, and then
Step 3
remove the appliance.
Installing IPS-4240 and IPS-4255
Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Follow proper safety procedures when performing these steps by reading the safety warnings in
Caution
Regulatory Compliance and Safety Information for the Cisco Intrusion Prevention System 4200 Series
Appliance
OL-15638-01
PW R ST
AT US
Sensor.
Installing Cisco Intrusion Prevention System Appliances and Modules 6.2
Ci sc o
AS A 42
40
Int rus ion
De tec tio
FL AS H n Se nso
r
Installing IPS-4240 and IPS-4255
2-7