Rack Mounting; Installing Ips-4240 And Ips-4255 - Cisco IPS-4240-K9 - Intrusion Protection Sys 4240 Installation Instructions Manual

Rack Mounting

Rack Mounting
To rack mount IPS-4240 and IPS-4255, follow these steps:
Step 1 Attach the bracket to the appliance using the supplied screws.
You can attach the brackets to the holes near the front of the appliance.
Note
Installing Cisco Intrusion Prevention System Appliances and Modules 6.2
2-6
C is c o
IP S 4 2
4 0
s e ri e s
In tr u s io
n P re v
e n ti o n
S e n s o
r
The top hole on the left bracket is a banana jack you can use for ESD grounding purposes when
you are servicing the system. You can use the two threaded holes to mount a ground lug to
ground the chassis.
Chapter 2

Installing IPS-4240 and IPS-4255

OL-15638-01