Front And Back Panel Features - Cisco IPS-4240-K9 - Intrusion Protection Sys 4240 Installation Instructions Manual

Front and Back Panel Features

•
•
IPS-4255 replaces IDS-4250-TX. There are four 10/100/1000 copper sensing interfaces. It monitors up
to 600 Mbps of aggregate network traffic on multiple sensing interfaces and is also inline ready. The
600-Mbps performance for IPS-4255 is based on the following conditions:
•
•
•
•
Front and Back Panel Features
Although the illustrations show IPS-4240, the IPS-4255 has the same front and back panel features and
Note
indicators.
This section describes the IPS-4240 and IPS-4255 front and back panel features and indicators.
Figure 2-1
Figure 2-1
Installing Cisco Intrusion Prevention System Appliances and Modules 6.2
2-2
Average packet size of 445 bytes
Running Cisco IPS 5.1 or later
The 250-Mbps performance is traffic combined from all four sensing interfaces.
Note
6000 new TCP connections per second
6000 HTTP transactions per second
Average packet size of 445 bytes
Running Cisco IPS 5.1 or later
The 600-Mbps performance is traffic combined from all four sensing interfaces.
Note
shows the front view of IPS-4240 and IPS-4255.
IPS-4240/IPS-4255 Front Panel Features
Chapter 2
PWR STATUS FLASH
Power Flash
Status
Installing IPS-4240 and IPS-4255
Cisco IPS 4240
series
Intrusion Prevention Sensor
OL-15638-01