Status; System - D-Link DFL-200 - Security Appliance User Manual

Status

In this section, the DFL-200 displays the status information about the Firewall.
Administrator may use the Status section to check the System Status, Interface statistics,
VPN status, IP connections, and DHCP Servers Status.

System

Click on Status in the menu bar, and then click System below it. A window will appear
providing some information about the DFL-200.
Uptime – The time the
firewall has been running,
since the last reboot or start.
Time – The current time
and date.
Configuration – Shows
when the last administrative
configuration change
activated as well as the
originating IP.
Firmware version – The
firmware version running on
the firewall.
Last restart – The reason
for the last restart.
IDS Signatures – The
IDS signature
versions.
Resources –
CPU load, RAM
Connections, VPN Tunnels
and Rules configured.
There are also two graphs
on this page; one shows the
CPU usage during the last 24
hours. The other shows the
state table usage during the last 24 hours.
application.
was
database
Displays
usage,
Useful for plotting usage trends for your