System status
Go to System > Status to make any of the following changes to the DFL-500 system status:
•
Changing the operating mode
•
Upgrading the DFL-500 firmware
•
Updating your antivirus database
•
Displaying the DFL-500 serial number
•
Backing-up system settings
•
Restoring system settings
•
Restoring system settings to factory defaults
•
Restarting the DFL-500
•
Shutting down the DFL-500
•
System status monitor
Changing the operating mode
Use the following procedure to switch the operating mode of the DFL-500 between NAT mode and
Transparent mode.
•
Go to System > Status .
•
Click Change Operation Mode
•
Choose an operation mode and click OK.
The DFL-500 changes operation mode.
•
Change your connection to the DFL-500 to be able to reconnect to the web-based manager.
In NAT mode connect to the Internal interface
o
In Transparent mode connect to the management interface
o
Upgrading the DFL-500 firmware
D-Link releases new versions of the DFL-500 firmware periodically. When D-Link releases new firmware, you
can download the upgrade from our Web site (http://www.DLink.com). You can save this file on your
management computer and then use the following procedure to upgrade the firmware on your DFL-500.
•
Go to System > Status .
•
Click Firmware Upgrade
•
Enter the path and filename of the firmware update file, or click Browse and locate the file.
•
Click OK to upload the firmware update file to the DFL-500.
The DFL-500 uploads the file and restarts the DFL-500 running the new version of the firmware.
•
Reconnect to the web-based manager.
•
Go to System > Status and check the Firmware Version to confirm that the updated firmware has been
installed successfully.
Updating your antivirus database
This procedure is described in
DFL-500 User's Manual
.
.
Updating your antivirus
database.
89