Table of Contents
Advertisement
Administering the DFL-1000
This chapter describes how to use the DFL-1000 web-based manager to administer and maintain the
DFL-1000. It contains the following sections:
•
Logging into the web-based manager
•
System status
•
Network configuration
•
System configuration
Logging into the web-based manager
To connect to the DFL-1000 using the web-based manager you require:
•
A computer with an ethernet connection
•
Internet Explorer version 4.0 or higher
•
A crossover cable or an ethernet hub and two ethernet cables
To connect to the web-based manager:
•
Make sure the computer from which you are going to connect to the web-based manager is correctly
configured on the same network as the DFL-1000 interface to which you are going to connect.
If the DFL-1000 is running in NAT mode, connect to the internal interface
If the DFL-1000 is running in Transparent Mode, connect to the DMZ interface
•
Start Internet Explorer and browse to the address https://address . Where address is the IP address
of the internal or DMZ interface to which you are connecting.
The DFL-1000 login page appears.
DFL-1000 login page
•
Type the administrator name and password and click Login.
System status
Go to System > Status to make the following changes to the DFL-1000 system status:
DFL-1000 User's Manual
91
Advertisement
Table of Contents
