Managing D-Link DFL-200
When a change is
made to the configuration,
a
new
icon
Activate
Changes
appear. When all changes
made by the administrator
are
complete,
changes need to be saved
and
activated
effect by clicking on the
Activate Changes button
on
the
Configuration
Changes
page. The firewall will
save the configuration and
reload it, making the new
changes take effect. In
order
to
make
changes permanent, the
administrator must login
again. This has to be done before a configurable timeout has been reached, otherwise the
DFL-200 will revert to the previous configuration. The timeout can be set on the Activate
Configuration Changes page, by choosing the time from the dropdown menu.
Resetting the DFL-200
To reset the DFL-200 to factory default settings simply press down and hold the reset
button for 15 seconds with the unit powered on. The Power light will go out, which will indicate
that the device is restarting with factory default settings. After this the DFL-200 will continue to
load and startup in default mode, i.e. with 192.168.1.1 on the LAN interface.
For more information on the reset procedure, refer to page 63.
named
will
those
to
take
Activate
the
10