Status; System - D-Link DFL-700 Manual

Status

In this section, the DFL-700 displays the status information about the Firewall.
Administrator may use Status to check the System Status, Interface statistics, VPN,
connections, and DHCP Servers.

System

Click on Status in the menu bar, and then click System below it. A window will appear
providing some information about the DFL-700.
Uptime – The time
the firewall has been
running, since the last
reboot or start.
CPU Load –
Percentage of cpu used.
Connections –
Number of current
connections trough the
firewall.
Firmware version –
The firmware version
running on the firewall.
Last restart – The
reason for the last restart.
IDS Signatures –
The IDS signature
versions.
There are also two
graphs on this page; one
shows the CPU usage
during the last 24 hours.
The other shows the
state table usage during
the last 24 hours.
68