Status; System - D-Link DFL-1100 Manual

Hide thumbs Also See for DFL-1100:

Table of Contents

Status

In this section, the DFL-1100 displays the status information about the Firewall.

Administrator may use Status to check the System Status, Interface statistics, VPN,

connections and DHCP Servers.

Click on Status in the menu bar, and then click System below it. A window will appear

providing some information about the DFL-1100.

Uptime – The time

the firewall have been

running, since the last

reboot or start.

CPU Load –

Percentage of cpu used.

Connections –

Number of current

connections trough the

firewall.

Firmware version –

The

firmware

version

running on the firewall.

Last restart – The

reason for the last

restart.

IDS Signatures –

The IDS signature

versions.

There are also two

graphs on this page,

one showing the CPU

usage during the last 24

hours. The other one is

showing the state table usage during the last 24 hours.

Table of Contents