Led Indicators; Trunking Setting - TRENDnet TE100-S16R User Manual

16-port 10/100mbps nway ethernet switch

Hide thumbs Also See for TE100-S16R:

Table of Contents

LED Indicators

Power (Power Indicator)

This indicator lights green when the hub is receiving power. This LED

is off indicating no power.

10/100M FDX and 10/100M COL (10/100Mbps Full-Duplex and

10/100Mbps Collision Indicator)

This LED indicator lights green when the respective port is in full-

duplex (FDX) mode. It remains off for half-duplex operation. This

LED blinks green when collision occurs on the respective port.

Note: the full-duplex LED lights green when the connected device

supports full-duplex operation.

10M Link/ACT and 100M Link/ACT (10Mbps Link/Activity

(amber) and 100Mbps Link/Activity (green) Indicator)

This indicator lights green when the port is connected to a 100Mbps

device. It blinks green when transmitting or receiving data on the

100Mbps network.

This indicator lights amber when the port is connected to a 10Mbps

device. It blinks amber when transmitting or receiving data on the

10Mbps network.

This Switch supports trunking function. Trunking function increases

backbone bandwidth and reduces network congestion; this is helpful

when the traffic is heavy between the cascaded Switches.

You can cascade two Switches via one trunking group (max. of 4

ports) with bandwidth up to 800Mbps; or cascade three (or more)

Table of Contents