Rear Panel - TRENDnet TE100-S16R User Manual

Port 8 and the Uplink port is really the same port, except that their
pin-outs are different. Do not use both Port 8 and the Uplink port at
the same time.

Rear Panel

Trunking setting DIP switch:
By using the trunking DIP switches, you can set the trunking function.
For detail information on how to configure trunking, please refer to
the Trunking Setting in the next section.
QoS setting DIP switch:
By using the QoS DIP switches, you can set the QoS function. For
detail information on how to setup QoS, please refer to the QoS
Setting in the next section.
AC Power Connector:
For the power cord.
8