Table of Contents Table of Contents Français ... 1. Avant de commencer ... 2. Installation du matériel ... Technical Specifications ... Troubleshooting ... Version 01.24.2007...
16/24 Ports 10/100Mbps Fast Ethernet Switch Laptop with PC Card (TE100-PCBUSR) 10/100Mbps TE100-S16R/TE100-S24R Guide d'installation rapide Cordon d'alimentation Kit de montage (TE100-S16R or TE100-S24R) Workstations with PCI Adapter Server with PCI Adapter (TE100-PCIWN) (TE100-PCIWA) Français Contenu de l'emballage 10/100Mbps Multi-Port...
2. Installation du matériel 1. Branchez le Cordon d'alimentation à l'arrière du TE100-S16R/TE100-S24R et à une prise de courant. 2. Branchez un câble réseau CAT-5 RJ-45 de l'ordinateur vers un port Ethernet disponible du TE100-S16R/TE100-S24R Français...
Page 5
Montage du rack Le boîtier peut être installé dans un rack EIA standard de 19 pouces qui peut être placé dans une armoire de répartition avec les autres équipements. 1. Attachez les supports de montage des deux côtés du châssis et fixez- les avec les vis fournies.
After connecting the Switch to a power outlet, the LEDs do not turn Check the connection of the external power adapter to the TE100-S16R/TE100-S24R and the power outlet. Also check that the power outlet is receiving power. When I connect a computer to the Switch's port, the LNK/ACT LED turns on, but the 100Mbps LED remains off.
Page 9
Return Material Authorization (RMA) number, accompanied by a copy of the dated proof of the purchase. Products returned to TRENDnet must be pre- authorized by TRENDnet with RMA number marked on the outside of the package, and...
Page 10
ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE OR USE OF TRENDNET’S PRODUCTS. TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMER’S OR ANY THIRD PERSON’S...
Page 11
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation.