Led Indicators - TRENDnet TE100-S8P User Manual

LED Indicators

When you power on the Switch, all LEDs will be ON for about
1 second and then go OFF, only the Power LED will stay lit.
For 5-port switch
Power
This indicator lights green when the hub is receiving power. It
is off for no power.
100M
This indicator lights green when the port is connected to an
active 100Mbps Fast Ethernet device. This LED is off when
the connection is 10Mbps or there is no connection to the port.
Link/Act
This indicator lights green when the port is connected to an
active Ethernet/Fast Ethernet device. The indicator blinks green
when the port is transmitting or receiving data on the network.
FDX/COL
This LED indicator lights green when a respective port is in
full duplex (FDX) mode. This LED blinks green when
collisions occur on the respective port.
Note: It is normal to see some collisions in the network. If a Port's
Collision LED is on constantly, check the status of the device the
port is connected to.
11