Cisco 5505 - ASA Firewall Edition Bundle Administrator's Manual page 30

Figure 3-1
To add an AnyConnect client image, Click Add in the SSL VPN Client Images area. The Add SSL VPN
Client Image dialog appears
Figure 3-2
If you already have an image located in the flash memory of the security appliance, you can enter the
name of the image in the Flash SVC Image field, and click OK. The SSL VPN Client Settings panel now
shows the AnyConnect client images you identified
Cisco AnyConnect VPN Client Administrator Guide
3-2
Chapter 3 Installing the AnyConnect Client and Configuring the Security Appliance with ASDM
SSL VPN Client Panel
(Figure 3-2).
Add SSL VPN Client Image Dialog
(Figure 3-3).
OL-12950-012