Cisco 5505 - ASA Firewall Edition Bundle Administrator's Manual page 50

Chapter 5 Configuring AnyConnect Features Using ASDM
Configuring, Enabling, and Using Other AnyConnect Features
Figure 5-7 SSL VPN Connection Profiles Dialog Box
In the Access Interfaces area, select the check box Enable Cisco AnyConnect VPN Client or legacy SSL
VPN Client access on the interfaces selected in the table below. Then select the check boxes for the
interfaces on which you want to enable access. Specify the Access Port. The default access port is 443.
If you want to assign a specific certificate to an interface, click Assign Certificate to Interface. This
opens the SSL Settings dialog box (Figure 5-8).
Cisco AnyConnect VPN Client Administrator Guide
5-8
OL-12950-012