DREAMS HOPKINS OTTOMAN Assemble Instruction

Dreams
HOPKINS OTTOMAN
KING BED
ASSEMBLE INSTRUCTION
2 PEOPLE REQUIRED
Please take time to read
instructions and familiarize
yourself with all the components
that make up your new bedstead.
Please retain this leaflet
for future reference.
A. This Lift Mechanism
not lift the mattress for you.
The system has been designed to effectively lift the base system fitted with a variety of
mattress weights and combinations of depth.
Depending on the combination of mattress weight and depth determines the degree of
assistance
B. Following installation of the mechanism lift / pull the base up and down a few times to free
off the system - the gas cylinders fitted to the system may be stiff when first used or if the
system has not been operated for a period of time .The mattress must be fitted to the base.
c. Use the strap handle to lift up the mattress base using two hands - Pull the mattress base
down using two hands equally spaced from the centre of the mattress base. DO NOT pull
down on one side of the base only as this is likely to damage the base system with potential
failure of the mattress base system and lift mechanism. Do not operate the lift up
mechanism
CAUTION
these
WARNING
THIS PRODUCT CONTAINS
PARTS AND PACKAGING
SHOULD BE KEEP AWAY
OF REACH FROM ALL
provide assistance
provided by the mechanism.
without the mattress
Do not allow children to operate the lift Mechanism.
Do not allow children near the lift base when operating the Mechanism.
Do not allow children in the area of the internal storage base.
Keep hands clear of the mechanism when operating the base system.
Do not stand inside the bed / on the internal storage base.
Do not overload the internal storage base.
PART LIST
D- SIDE RAIL (R) X 1
G - BASE PANEL
SMALL
THAT
AND OUT
I - BOTTOM
CHILDREN.
RAIL (SHORT) X 1
with the lift of the mattress fitted to the base - it does
fitted to the base.
FRONT LIFT
BASE X 1
H - MATTRESS
X 4 SUPPORT
J - BOTTOM
CROSS
BAR (LONG) X 1
F- BACK LIFT
BASE X 1
RAIL X 1
CROSS
Page 1 of 7