Related Manuals for DREAMS HART LIFESTYLE BED SLEEPMOTION
Summary of Contents for DREAMS HART LIFESTYLE BED SLEEPMOTION
- Page 1 HART LIFESTYLE BED SLEEPMOTION 2 hour approx Two person assembly time assembly MK1 220419...
-
Page 2: Assembly Tips
Thank you Hello, thanks for choosing to purchase your bed from Dreams - you're now on your way to your best ever night's sleep. Before you begin building your bed, please take a moment to read through the instructions and make sure that you've got all the relevant parts listed on the following pages. -
Page 3: Parts List
Parts The bed you have purchased comes with a Sleepmotion Lifestyle electric base. Complete the assembly of the Sleepmotion base before assembly of the bed frame. Assembly Instructions are included within the Sleepmotion base carton. Once the base is assembled in the final location, follow the steps below to build your bed frame around it. The dotted lined parts shown are packed in the sleepmotion bed base carton itself. - Page 4 Important: Before starting assembly please refer to the owners manual supplied with your sleepmotion bed base and follow the instructions taking note of any safety precautions or operational safety requirements of the installation. In the room where bed will be used, first prepare the bed base by fitting the eight long legs - 6‘’...
- Page 5 Prepare the bed for assembly. 10mm 10mm Assemble the bed frame around the bed base. Firstly screw in the eight 6" (15cm) legs as shown. Hart Sleepmotion Lifestyle Bed - Assembly guide - Page 5...
- Page 6 Position the electric bed base. Place the headboard in the location in which the bed shall be used and attach the right hand side rail using bolt se ts (a, b & c). Make sure the be d base is corre ct way round with mattress stopper at the foot end.
- Page 7 Connect power to the electric bed base. Connect Power Lead for electric base to your wall socket - for safety this must be an earthed power supply. Raise the head and foot ends of the bed base using the bed base remote control. Position footboard and connect to the side rail brackets.
- Page 8 Make sure everything is working properly then fit the left hand side rail. Make certain the bed is squared up as 100% shown in the diagram then tighten all bed assembly bolts 100%. Hart Sleepmotion Lifestyle Bed - Assembly guide - Page 8...
- Page 9 Check that there is the correct gap around the perimeter of the bed base 30mm 20mm Hart Sleepmotion Lifestyle Bed - Assembly guide - Page 9...
-
Page 10: Care And Maintenance
Overall Dimensions (LWH cm) Double: 207 x 233 x 116 King: 217 x 248 x 116 Internal Dimensions (LW cm) Double: 193 x 138 King: 203 x 153 33.5 Floor to top of base. Top of side rail to top of base Care and maintenance Here are some tips to keep your new bed in tip-top condition Cleaning... - Page 11 Little dreamers Keep the little ones entertained while you assemble your new purchase.
Need help?
Do you have a question about the HART LIFESTYLE BED SLEEPMOTION and is the answer not in the manual?
Questions and answers