Soft Buttons On The Edit Song: Track Page - Kurzweil K2000 - MUSICIANS GUIDE Musician's Manual

Hi(Vel)
The Hi(Vel) parameter sets the highest attack velocity a Note needs to have in order to be
edited. Notes on the selected track(s) with attack velocities higher than the Hi(Vel) will not be
affected by the edit. The available values are 1 Ð 127; the default is 127.
When Events is set to: Controller
If your Song contains any MIDI Controller data, the Ctl parameter is used to select particular
controller data to be edited. Refer to the Control Source list in Chapter 6 of the Reference Guide.
LoVal
You may further specify a particular range of values to edit by setting a high and low value.
LoVal will deÞne the lowest modiÞable value in the selected controller's recorded data. Value
ranges are not deÞnable when Ctl is set to All. Available Values are 0 - 127.
Hi(Val)
Hi(Val) will deÞne the highest modiÞable value in the selected controller's recorded data.
Value ranges are not deÞnable when Ctl is set to All. Available Values are 0 - 127.

Soft Buttons on the Edit Song: Track Page

FromTo is a quick way to deÞne the region of time you intend to edit. There are a couple of
ways to use this feature when the sequence is playing back in real time, and both ways will set
the temporal boundaries of the region to a Þner resolution than Bars and Beats.
One way is to Þrst position the cursor over the From Þeld in the Region / Criteria Window and
then press the Play soft button. At this point, every time you press FromTo, the From Bar and
Beat will reßect a location in the Song at each time the button press was made. Position the
cursor over the To Þeld and set the To location in a similar fashion.
When the cursor is positioned somewhere other than over the From or To Þelds, the function of
the FromTo soft button is slightly different. Now, once you start the sequence playing back, and
you press FromTo before the current To Bar and Beat location, you will set a new From location.
Without stopping the sequence and starting it again, press FromTo a second time, and if it was
pressed at a point after the From location, that point in time will represent a new To location. If
the second FromTo press happens before the current From Bar and Beat, that point in time
becomes the new From location, and the old From location becomes the new To.
To sum up this functionality, when this button is pressed while the Song is playing, the K2vx
will know which Þeld, (the From or the To), to update based on the relative position, (before or
after the current settings), when the button was pressed.
Play will start the playback of the Song from the Bar and Beat set in the Locate parameter.
When the Song is playing, this soft button becomes Pause.
Stop stops the playback of the Song and return to the Bar and Beat set as the Locate value.
Go performs any of the Track-based edit functions described above.
Done will return you to the EditSong : COMMON page.
Song Mode
Edit Song: TRACK Page
12-33