Misc Page - Kurzweil K2000 - MUSICIANS GUIDE Musician's Manual

Song Mode

MISC Page

MISC Page
This page contains parameters that determine how the sequencer behaves during playback and
recording, and when the K2vx is connected to another MIDI sequencer. Most of these settings
are stored in the Master Object, (all except the Auto punch-in points) and none of these are
saved with the Song.
PARAMETER
RECORD MODE
PLAY MODE
KEY WAIT
LOCATE
AUTO IN
AUTO OUT
INPUT QUANTIZE
GRID
SWING
SYNC
CLOCK
TEMPO
COUNTOFF
CLICK
CLICK CHANNEL
CLICK PROGRAM 1 – 999
CLICK KEY
CLICK VELOCITY
The top line displays the amount of free RAM space and the current sequencer state, which is
one of the following: STOPPED, PLAYING, REC READY, RECORDING, KEY WAIT, or EXT.
CLOCK.
RecMode
When recording the Þrst track of a new Song, you will be able to record as if you had an endless
length of ÒtapeÓ no matter what the Record Mode is set to.
When you record the Þrst track, all Record Modes operate the same way. This is because until
you deÞne the length of a new Song, its End point is the default setting of Bar 8001, the
maximum amount of Bars in a Song. The End point is referenced and modiÞed in different
ways depending on the RecMode.
The End point of a song is deÞned when:
1)
12-18
SongMode:MISC||Events:186K|||STOPPED||||
RecMode|:Linear|Quant:Off|||CountOff:1||
PlayMode:Loop|||Grid|:1/8|||Click|||:Rec
KeyWait|:Off||||Swing:0%||||ClickCh|:16|
Locate||:||1:1||Sync|:Both||ClickPrg:198
AutoIn||:||1:1||Clock:Int|||ClickKey:C|4
AutoOut|:||1:1||Tempo:Auto||ClickVel:90|
Record||Play|||Stop|||New|||In/Out|MAIN|
RANGE OF VALUES
LINEAR, FIXLEN, LOOP, UNLOOP, AUTO
LINEAR, LOOP, LIST, CHAIN
ON, OFF
-25:2 – 999:4
1:1 – 999:4
1:1 – 2500:
OFF, 1% – 100%
1/1 – 1/384
-99% – 125%
BOTH, XMIT, RECV, OFF
INT, EXT
AUTO, FIXED
OFF, 1, 2, 3
OFF, REC, ON, CNT
1 – 16
C-1 – G9
1 – 127
The Stop button is pressed to end the recording of the Þrst track. The new End point is
aligned to the nearest downbeat of the (empty) Bar immediately following the last Bar you
were recording when Stop was pressed.
DEFAULT
LINEAR
LOOP
OFF
1:1
1:1
1:1
OFF
1/8
0%
OFF
INT
AUTO
1
REC
16
198
C4
90