Hard Floor Cleaning - Bissell PROheat 57G7 Series User Manual

O
peration

Hard Floor Cleaning

Your deep cleaner may have included a hard
floor tool and Hard Floor Solutions Formula. The
hard floor tool provides effective cleaning for
linoleum, vinyl, and tile floors.
Caution: Do not use on unsealed hardwood floors.
1.
Thoroughly vacuum or sweep floor to pick
up any debris.
NOTE: Prior to filling with formula and water be
sure all carpet cleaning formula is thoroughly
rinsed from the 2-in-1 water tank.
2. Fill BISSELL Hard Floor Solutions Formula to
the indicated fill line in the built in measuring
cup and pour into mouth of bladder.
3.
Fill the bladder with clean hand hot tap
water and set aside.
4. Attach the hard floor tool to the bottom of the
machine by hooking it into the nozzle and
swinging it down until it clicks into place.
5. Be sure the ReadyTools dial is set to
FLooR CLEAnIng.
6.
Plug into an outlet and turn the power on.
7.
Plan your cleaning route to leave an exit
path. Be sure to allow adequate time for
floors to dry.
8.
While pressing the spray trigger, make one
slow forward wet pass and another back.
Caution: Do Not Overwet.
9. Repeat the motion without pressing the
spray trigger using the hard floor tool to
squeegee and suction up the dirty water.
10. When finished, remove hard floor tool,
rinse and let dry before storing. Refer to
the Maintenance section on page 15 for
machine clean up and storage instructions.
14
w w w . b i s s e l l . c o m
4.