Bissell PROheat 57G7 Series User Manual page 10

O
peration
Fill the 2-in-1 water tank
1.
Remove the tank from the base of the
machine by lifting the tank carry handle.
2. Carry like a bucket to the sink. Rotate the
handle forward to unlatch the lid. Remove lid,
turn over and locate built in measuring cup.
3. Fill formula to the indicated fill line on the
built in measuring cup and pour into mouth
of the bladder.
4.
Fill the bladder with clean hand hot tap water.
*Do not boil or microwave water as it
can destroy the bladder.
5.
Replace the top of the tank by matching
the lid and tank edges. Handle must be in
the forward position in order to replace lid.
Rotate the handle to the carrying position to
latch the lid.
Note: Remember to secure the lid and test
to make sure it is secure before picking up
the tank.
6. Place tank into machine base, seating firmly
in place. Rotate tank handle back into latched
position.
10
w w w . b i s s e l l . c o m
2.
1.
3.
5.
4.
6.