TJERNLUND FULL LINE LITERATURE 8500669 REV D 0605 Manual

Tjernlund's inception dates back to 1938 when
Emil Tjernlund and his son Bob started designing
and manufacturing oil fired forced air furnaces.
From this start their product offering evolved
into gas fired furnaces and custom packaged roof
top heating and cooling equipment. In the mid
1950's our Auto-Draft® Inducers were developed
to eliminate draft problems associated with short
stacks on roof top units. Other people within the
heating industry soon saw the advantages of our
Draft Inducers and wholesale distribution of the
Auto-Draft® Inducers began in 1957.
Today Tjernlund is North America's leading
manufacturer of induced draft and combustion
air systems and controls. We have millions of
Inducers, Power Venters and Combustion Air
Systems in operation.
Relationships with most boiler and water heater
manufacturers provide us with a working knowl-
edge of their product requirements that we use
to develop solutions to real world draft, combus-
tion air and ventilation problems.
Tjernlund products perform and endure through
tough environments because we take pride in
engineering and manufacturing to the highest
quality standards. Our microprocessor-based
controls have user selectable operation and
interlock features, simplifying installation and
delivering tailored performance.
Communicating with us is easy. You can be
assured of an immediate response to a question
or request. We will discuss your application and
provide the best solution. If we can't help you,
we will put you in touch with someone who can.
Our mission, over four generations of family
ownership, has been to provide quality
engineered and manufactured products that
solve exhaust, ventilation and heating/cooling
problems.
Rely on Tjernlund (Churn~Iund). Our name may
be hard to pronounce, but we make everything
else easy.