RocketFish RF-RBWS02 User Manual page 9

Sender/receiver (front panel)
# Feature
Power/Join button
1
Power/Join indicator
2
Standby indicator
3
Remote control sensor
4
window
Source
5
Receiver mode indicator Turns blue when receiving audio from a Rocketboost sender. Blinks slowly if the current
6
Sender mode indicator
7
TM
1 2 3
Description
Press to turn the sender/receiver on. Press and hold to initiate joining. Press again to go to
standby mode. When you connect the AC power adapter, the device turns on automatically.
Lights blue when the HUB STATUS switch is set to DISABLE.
Lights green when the HUB STATUS switch is set to ENABLE.
The indicator will turn solid when it is joined in a network, if the device is not in a network,
the indicator blinks slowly. When the device is put in joining mode, the indicator blinks
rapidly.
Turns red when the sender/receiver is in standby mode.
Receives the signal from the remote control.
Press to select different audio streams on your Rocketboost network. Each press moves to the
next source.
source listened to is muted.
Note: This indicator will not be lit if the Rocketboost sender is turned off. Press the SOURCE
button to find the next available source.
Turns blue when sending audio.
Note: This indicator will light automatically when a 3.5 mm connector is attached to the
device (the device senses the cable connection).
4
5
RF-RBWS02
6 7
9