RocketFish RF-RBWS02 User Manual page 24

To join an existing Rocketboost network:
Set the HUB switch on the sender/receiver to DISABLE.
1
• The power indicators turn green when the HUB switch is set to ENABLE.
• The power indicators turn blue when the HUB switch is set to DISABLE.
Press and hold the POWER button on the your Rocketboost Hub device for
2
more than three seconds to put it into joining mode. The power
indicator starts blinking rapidly and the unit will stay in joining mode for
30 seconds.
Press and hold the
3
seconds so the Hub device and sender/receiver enter joining mode.
• The power indicators light steadily if the joining was successful.
• The power indicators blink slowly if the joining was not successful.
Press and hold the POWER button on the your Rocketboost Hub device for
4
more than three seconds to put it into joining mode. The power
indicator starts blinking rapidly and the unit will stay in joining mode for
30 seconds.
Press and hold the
5
seconds so the Hub device and wireless speaker enter joining mode.
• The power indicators light steadily if the joining was successful.
24
RF-RBAUX or other
Rocketboost device.
(HUB: ENABLE)
Outdoor
speaker
Sender/receiver
(included with outdoor
speaker) (HUB: DISABLE)
button on the sender/receiver for more than three
button on the wireless speaker for more than three