NETGEAR FS752TP Hardware Installation Manual page 14

10/100/1000M Gigabit Ports
Each 10/100/1000M copper port has one LED per port. The possible states and associated
meaning are shown in the table below.
Table 3. Link/ACT/Speed LED
State
Solid Green
Blinking Green
Solid Yellow
Blinking Yellow
Off
If port 49, 50 port media changes to SFP, the copper port LED will change to the OFF status.
100/1000M SFP Ports
Each SFP port has one LED. The possible states and associated meaning are shown in the
table below.
Table 4. SFP LED
State
Solid Green
Blinking Green
Solid Yellow
Blinking Yellow
Off
If port 49, 50 port media changes to Copper, the SFP port LED will change to the OFF status.
FS752TP Smart Switch
Designation
A valid 1000 Mbps link is established on the port.
Packets transmission or reception occurring on the port at 1000 Mbps.
A valid 10/100 Mbps link is established on the port.
Packets transmission or reception occurring on the port at 10/100 Mbps.
No link is established on the port.
Designation
A valid 1000 Mbps link is established on the SFP port.
Packets transmission or reception occurring on the port and the link is
1000 Mbps.
A valid 100 Mbps link is established on the SFP port.
Packets transmission or reception occurring on the port and the link is
100 Mbps.
No link is established on the port.
Physical Description
14